Error Code E It
Abnormal Ice Maker Unit — Ice maker step motor fault, Hall IC, or wire short. Fault in motor driving circuit.
Moderate
Address soon - your appliance may not work properly
Also displayed as: E It
How to Fix
- 1
Step 1: Check if connector is disconnected or loose between Main PCB and ice maker motor.
- 2
Step 2: If disconnected, reconnect or repair the connector.
- 3
Step 3: Check ice maker motor housing resistance at CON1 26th~28th pin. Expected: 19.7 ohm. If not, change the ice maker (IM) unit.
- 4
Step 4: Push the I/M test key and check voltage in I/M test mode at CON1 18th~23rd pin. Expected: between 0~5V (varying). If voltage is not correct, change the IM unit or replace Main PCB.
- 5
Step 5: If all values are correct, explain to customer.
This Error Applies To
LG LHSXS2706 Series Refrigerators
Related Error Codes
Wi-Fi PCB Abnormal — Wi-Fi PCB and display PCB connection fail or Wi-Fi PCB defective. Applies only to GID & Best models with Wi-Fi.
Freezer Sensor Error — Freezer sensor short or open
Refrigerator Sensor Error — Refrigerator sensor (upper part) short or open
UV/Nano LED Module Error — Bad UV LED module or poor connection between display and UV module. Caused when feedback signals are abnormal.
Defrost Sensor Error — Defrost sensor short or open
Failed Defrosting — Defrost heater, temperature fuse short circuited or unplugged connector. Error indicated 4 hours after failure occurs.
Abnormal Freezer Fan Motor — Connection line of fan motor is fault, short, or open. Fault displayed when operating fan motor for 65 seconds without output signal.
Condenser Fan Motor Error — Connection line of condenser fan motor is fault, short, or open. Fault displayed when operating fan motor for 65 seconds without output signal.